The flashing of the power adapter light may be caused by various reasons, including:

　　Internal circuit malfunction

　　-Capacitor issue: The power adapter contains various capacitors such as filtering capacitors, which mainly serve to smooth the DC voltage. If there is leakage or capacity decrease in the capacitor, it may cause unstable output voltage, resulting in flashing of the indicator light. For example, in some low-quality power adapters, due to the poor quality of the capacitors, the performance of the capacitors decreases after long-term use, which can easily lead to this problem.

　　-Transformer failure: Transformer is a key component for voltage conversion in power adapters. If there is a short circuit or open circuit fault in the winding of the transformer, it will affect the normal operation of the entire circuit, resulting in abnormal output voltage and causing the indicator light to flash. This situation may be caused by the transformer working in a high-temperature environment for a long time or being subjected to external voltage shocks.

　　External factors influence

　　-Overload protection: When the power of the device connected to the power adapter exceeds the load capacity of the adapter, the internal overload protection mechanism of the adapter will be activated. At this point, the adapter may indicate an overload situation by flashing indicator lights. For example, connecting a high-power electrical device to a power adapter with a lower rated power may trigger this protection mechanism.

　　-Unstable input power supply: If the mains voltage is unstable, fluctuating high and low, it can also affect the output of the power adapter, causing the indicator light to flash. Especially in areas with poor power grid quality or during peak electricity consumption periods, this situation may be quite common.

　　Other possible reasons

　　-Poor contact: Poor contact between the power adapter and the socket or device can also cause the indicator light to flash. This may be caused by loose plugs, deformed internal spring plates of the socket, or dust, debris, and other reasons at the interface. For example, frequent plugging and unplugging of power adapters may result in poor contact between the plug and socket, thereby affecting the normal transmission of power.

　　-Component aging: As the usage time of the power adapter increases, various electronic components inside will gradually age. In addition to the capacitors and transformers mentioned earlier, components such as diodes and transistors may also experience performance degradation, which can lead to unstable operation of the power adapter and flashing indicator lights.

Read recommendations:

24V2A Universal 4-pin

54V1.17A Wall Plug UK Standard

PD65W Wall Plug

EI linear adapter wholesale

18W medical switching adapter Factory