Where Is the Overload Protection Feature in Power Adapters and How to Remove It?

　　Overload protection in power adapters is typically integrated within the circuit board. It consists of components such as fuses, thermistors, and over - current protection circuits. Fuses are often small, cylindrical components that break the circuit when the current exceeds a certain level. Thermistors are temperature - sensitive resistors that can trigger a shutdown when the adapter overheats.

　　However, it is strongly not recommended to remove the overload protection feature. Overload protection is a crucial safety mechanism designed to prevent damage to both the adapter and the connected device. Removing it can lead to serious consequences. Without overload protection, an adapter may continue to supply power even when there is a fault, such as a short - circuit in the connected device. This can cause the adapter to overheat, potentially leading to a fire.

　　Moreover, attempting to remove overload protection voids the warranty of the adapter. Instead of removing the protection, it’s advisable to address the root cause of the overload. If the adapter frequently triggers overload protection, check if the connected devices are drawing more power than the adapter can provide. Consider using an adapter with a higher wattage rating if necessary. If the problem persists, seek professional help to diagnose and fix the issue rather than disabling a vital safety feature.

Read recommendations:

12V1.5A Side plug Australian standard

5V2A Wall Plug Australian Standard

90W Square Switching power supply

Common problems and solutions for electric vehicle chargers

What are the three models of battery chargers