home > News > Industry News

Fire retardant measures for cables

source:Industry News     Popular:adapter     release time:2021-06-21 10:10:20     Article author:sznbone    

  Fire retardant measures for cables

  (a) Apply fire-resistant paint on the surface of the cable.

  (b) Wrap the parts of the cable that need to be flameproof with fireproof tape.

  (c) The holes where the cable passes through the wall, the bottom of the plate, and the shaft are tightly sealed with refractory materials to avoid the spread and spread of high-temperature smoke when the cable is on fire, which will cause the fire area to expand.

  (d) Set up heat-resistant and fire-proof panels between the cable layers, segmented partition walls and fire doors to prevent the cable layers from combusting and expand the fire.

Fire retardant measures for cables(图1)

  (e) Wrap the cable with a heat-insulating and flame-resistant material. When the cable is on fire, the wrapped cable is isolated from the fire by the heat-insulating and flame-resistant material to avoid burning. If the cable itself catches fire, the lack of oxygen in the bandage can cause the fire to extinguish itself, preventing the fire from spreading to the outside of the bandage.

  The common faults of power cables are oil leakage, grounding and short circuit, internal disconnection, etc. For these failures, effective measures should be taken to make the defects be dealt with in a timely manner or at least not continue to deteriorate. Oil leakage caused by overload. When the cable is overloaded and the temperature is too high, the oil pressure inside the cable rises a lot. Generally, if the cable has no intermediate joint or the cable is of good quality, the cable oil will leak out from the cable end by breaking the seal. Due to this situation, the oil leakage caused should first be monitored for overload operation during the operation of the cable. Under normal circumstances, the overload operation of the cable is strictly prohibited.

  The main reason-pimple

  1. The phenomenon of pimple

  (1) The lump produced by the resin during the plasticization process has small crystal points and small particles on the surface of the plastic layer, which are distributed around the surface of the plastic layer.

  (2) The lump produced by scorching, there is scorch on the surface of the plastic layer, especially reflected on the surface of the glue joint.

  (3) Impurity lumps, there are impurities on the plastic surface, and there are impurities in the sliced lumps.

  (4) Plastic bumps caused by poor plasticization. After slicing, it is found that there is cooked glue inside the bumps.

  2. Causes of pimple

  (1) Due to the low temperature control, the plastic is extruded from the die before it is plasticized.

  (2) The quality of plastics is poor, and there are resins that are difficult to plasticize, which are squeezed out without being completely plasticized.

  (3) Some impurities are added into the hopper when feeding, causing impurity lumps.

  (4) The temperature control is super high, causing scorch and scorching lump.

  (5) The molded cover is not pressed tightly, and it deteriorates after being glued, and scorched bumps appear.


Read recommendations:

12-24W Medical Switching Power Supply

24W 2USB Charger,24W Charger ,2USB Charger

3-12W Medical Switching Power Supply 3W Switching Power Supply 12W Power Supply

Several common problems with power adapters!power adapter company

UL announced the effective date of UL/EN 62368-1

Related Information

What are the unique advantages of high frequency switching power adapter

2022-04-20

General Mechanism Analysis of Switching Power Adapter.ac power adapter wholesaler

2022-04-19

Suppression method of low frequency ripple of switching power supply

2022-04-16

Why is the power adapter making noise?

2022-04-15

When the power adapter is in normal use, what is the normal temperature?

2022-04-14

90% of people use the car charger incorrectly, are you using it right?CAR POWER SUPPLY sales

2022-04-13

The difference between a power adapter and a voltage regulator

2022-04-12

Select the power adapter to determine these three adaptation conditions.SWITCHING POWER Vendor

2022-04-11

Why is the original power adapter better than the non-original one?TRANSFORMER Production

2022-04-09

What are the industries where the power adapter can be applied?CAR CHARGER wholesale

2022-04-08

What is the difference between high-end and low-end power adapters? How to check after playing,CAR P

2022-04-07

How to design a good power adapter,CAR CHARGER wholesaler

2022-04-07

Customized desktop power adapter

2022-04-06

The quality of the switching power supply determines the safety of electricity use,CAR CHARGER whole

2022-04-02

What are the advantages of wireless chargers?

2022-03-30

PD charger is a must-have at home

2022-03-29

What are the main materials of the power adapter shell?

2022-03-26

What is a PD power adapter? It can make charging ubiquitous

2022-03-25

Slow charging? Try a fast charger

2022-03-24

Do you understand the cause of abnormal noise in the power adapter?

2022-03-23

Reasons for abnormal noise of the power adapter

2022-03-22

Talking about the common problems of the power adapter

2022-03-19

General manufacturer power adapter reliability test items

2022-03-18

More energy efficient and safe power adapter

2022-03-17

Five ways to solve the power adapter overheating?

2022-03-16

What are the common connection faults of cottage shared chargers on the market?

2022-03-15

How to use the car charger and matters needing attention!

2022-03-14

Do you know the difference between a power adapter and a charger,CAR CHARGER Processor

2022-03-12

The power adapter has a very wide range of applications,Audio Transformer

2022-03-11

What is the development trend of the power adapter industry,AC ADAPTER

2022-03-10

Popular recommended products

ER42 High Frequency Transformer

2020-08-27

12-36W POE POWER SUPPLY

2020-08-27

Transformer,Power Transformer,Ring Power Transformer

2020-08-27

EI-48 ADAPTER LINEAR ADAPTOR Switching Power Adapter INTERCHANGEABLE ADAPTOR Linear Adapter

2020-08-28

12W 2USB Charger,2USB Charger,12W Charger,USB Charger

2020-08-27

MK-C1806028 MKA ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

EI-28 AC ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter Linear Adapter

2020-08-28

500W Charger,Charger

2020-08-28

3-15W Switching Power Supply

2020-08-28

EI-35 ADAPTER AC ADAPTER SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

24-65W Medical Switching Power Supply

2020-08-27

30W PD Charger,30W Charger,PD Charger

2020-08-27

MKS-1202000-36 Switching Power Supply

2020-08-29

3-12W Medical Switching Power Supply 3W Switching Power Supply 12W Power Supply

2020-08-27

24W 2USB Charger,24W Charger ,2USB Charger

2020-08-27

36-65W Switching Power Supply

2020-08-29

MKS-120200EU-36 Switching Power Supply

2020-08-29

12W CAR CHARGER,12W USB CAR CHARGER,CAR CHARGER,12W CHARGER

2020-08-27

40W 4USB Charger,40W Charger,4USB Charger

2020-08-27

19V2A 36W Switching Power Supply

2020-08-28

60W 6USB Charger,60W Charger,6USB Charger,Charger

2020-08-27

24-65W Switching Power Supply

2020-08-29

EI Power Transformer Power Transformer

2020-08-27

MKS-120200BS-36 Switching Power Supply

2020-08-29

MKS-1201250HEU Switching Power Supply

2020-08-29

12V2ASwitching Power Supply

2020-08-28

24V21A LED Power Supply 24V Power Supply 21A Power Supply

2020-08-27

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

45W PD Charger,45W Charger,PD Charger

2020-08-27

EI-41 ADAPTER AC ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Adapter

2020-08-28
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved