home > News > Industry News

Technical measures for cable fire accidents

source:Industry News     Popular:adapter     release time:2021-06-16 09:26:59     Article author:sznbone    

  When laying the cable, do not damage the cable sheath or allow the cable to be mechanically damaged, so as to prevent the cable from breaking down due to poor insulation and generating arcs, which may cause the cable insulation material and the outer linen cloth to catch fire. All cable holes, such as walls and floors, where cables pass through, should be tightly sealed and blocked. In this way, once the cable catches fire, the burning range can be isolated or limited to prevent the fire from spreading. However, when the temperature of the cable trench and the cable is too high, ventilation should be paid attention to.

Technical measures for cable fire accidents(图1)

  Prevent long-term overload operation of the cable, frequently measure and monitor the load of the cable, take measures to prevent rats and other small animals from biting the cable insulation, and regularly check the cable head and intermediate joints. In case of heavy rains, floods and other special circumstances, check in time:

  ① Check the insulation sleeve of the terminal head for damage and discharge. For the terminal head filled with cable glue, check for oil leakage and glue overflow;

  ②Check whether the wiring between the lead wire and the terminal is in good condition, and whether there is heating phenomenon;

  ③Check whether the cable middle joint is deformed and the temperature is normal.

  The cable laying position difference should not exceed the specified requirements, so as to avoid the phenomenon of oil dripping, causing the oil in the upper part of the cable to dry up and inhale moisture, and the lower cable head will leak oil due to the increase of oil pressure. These conditions are likely to cause the cable to catch fire. The production of cable heads, cable intermediate boxes, etc. must ensure quality to avoid moisture intrusion due to poor sealing, weak welding, improper material selection, incorrect manufacturing processes, etc., which may cause insulation breakdown and fire. The cable should be laid as far away as possible from the heat source; the distance between the cable and the heating pipe should be greater than 25cm, or heat insulation measures should be taken. When working with open fire near the cable trench, prevent the fire from entering the trench. The cable trench should be kept clean and sewage drainage measures should be provided. If water and oil accumulation are found, they should be removed in time.

  In addition, we must carry out line safety inspections on a regular basis. For wires, electrical equipment, etc., please ask professionals to conduct a thorough inspection at least once a year, especially for circuits with long service life at the joints. If unsafe conditions such as wire aging, damage, poor insulation, etc. are found, they must be repaired and replaced in time to ensure electricity use. Safety. Finally, remind everyone that when purchasing wires and cables, you must look for regular manufacturers and check the quality.


Read recommendations:

EI-41 ADAPTER AC ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Adapter

MKA-571652420 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

30-500W LED Power Supply 30-500W Power Supply

When choosing a power adapter, price and quality are more important

Distinguish the two types of cables

Related Information

What are the unique advantages of high frequency switching power adapter

2022-04-20

General Mechanism Analysis of Switching Power Adapter.ac power adapter wholesaler

2022-04-19

Suppression method of low frequency ripple of switching power supply

2022-04-16

Why is the power adapter making noise?

2022-04-15

When the power adapter is in normal use, what is the normal temperature?

2022-04-14

90% of people use the car charger incorrectly, are you using it right?CAR POWER SUPPLY sales

2022-04-13

The difference between a power adapter and a voltage regulator

2022-04-12

Select the power adapter to determine these three adaptation conditions.SWITCHING POWER Vendor

2022-04-11

Why is the original power adapter better than the non-original one?TRANSFORMER Production

2022-04-09

What are the industries where the power adapter can be applied?CAR CHARGER wholesale

2022-04-08

What is the difference between high-end and low-end power adapters? How to check after playing,CAR P

2022-04-07

How to design a good power adapter,CAR CHARGER wholesaler

2022-04-07

Customized desktop power adapter

2022-04-06

The quality of the switching power supply determines the safety of electricity use,CAR CHARGER whole

2022-04-02

What are the advantages of wireless chargers?

2022-03-30

PD charger is a must-have at home

2022-03-29

What are the main materials of the power adapter shell?

2022-03-26

What is a PD power adapter? It can make charging ubiquitous

2022-03-25

Slow charging? Try a fast charger

2022-03-24

Do you understand the cause of abnormal noise in the power adapter?

2022-03-23

Reasons for abnormal noise of the power adapter

2022-03-22

Talking about the common problems of the power adapter

2022-03-19

General manufacturer power adapter reliability test items

2022-03-18

More energy efficient and safe power adapter

2022-03-17

Five ways to solve the power adapter overheating?

2022-03-16

What are the common connection faults of cottage shared chargers on the market?

2022-03-15

How to use the car charger and matters needing attention!

2022-03-14

Do you know the difference between a power adapter and a charger,CAR CHARGER Processor

2022-03-12

The power adapter has a very wide range of applications,Audio Transformer

2022-03-11

What is the development trend of the power adapter industry,AC ADAPTER

2022-03-10

Popular recommended products

18-25W Switching Power Supply

2020-08-28

24-65W Switching Power Supply

2020-08-29

3-15W Switching Power Supply

2020-08-28

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

MKS-1202000-36 Switching Power Supply

2020-08-29

EI-41 ADAPTER AC ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Adapter

2020-08-28

30-500W LED Power Supply 30-500W Power Supply

2020-08-27

ER42 High Frequency Transformer

2020-08-27

12W 2USB Charger,2USB Charger,12W Charger,USB Charger

2020-08-27

36-65W Switching Power Supply

2020-08-29

10-24W Charger,24W Charger,10W Charger

2020-08-27

24W USB Charger,24W Charger,USB Charger

2020-08-27

12W POWER SUPPLY,12W CAR POWER SUPPLY,POWER SUPPLY,CAR POWER SUPPLY

2020-08-27

EI-35 ADAPTER AC ADAPTER SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

100-300W Charger,100W Charger,200W Charger,300W Charger

2020-08-27

EI-66 ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

MKA-571652420 ADAPTER AC ADAPTER CE ADAPTOR UL ADAPTOR Linear Adapter

2020-08-28

72-200W Switching Power Supply

2020-08-29

12W CAR CHARGER,12W USB CAR CHARGER,CAR CHARGER,12W CHARGER

2020-08-27

60W 6USB Charger,60W Charger,6USB Charger,Charger

2020-08-27

QC3.0 24W USB Charger,24W USB Charger,24W USB Charger,USB Charger

2020-08-27

Transformer,High Frequency Transformer,Frequency Transformer

2020-08-27

EI Power Transformer Power Transformer

2020-08-27

12-36W POE POWER SUPPLY

2020-08-27

MKS-120200EU-36 Switching Power Supply

2020-08-29

MKS-120200BS-36 Switching Power Supply

2020-08-29

MKS-1203000EX Switching Power Supply

2020-08-29

19V2A 36W Switching Power Supply

2020-08-28

30W PD Charger,30W Charger,PD Charger

2020-08-27

3-12W Medical Switching Power Supply 3W Switching Power Supply 12W Power Supply

2020-08-27
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved